18" Maintenance Gate Valve with Custom Transition
Location: California
Material Handled: Dry Clay
Use: Emergency Material Shut Off Valve
The Vortex Model No. MSC18-E144527 Maintenance Gate Valve is designed for handling dry clay, meeting the specific demands of processing this material. Dry clay, a fine, powdery material formed from weathered rocks and minerals, is widely used in construction, ceramics, and pharmaceuticals due to its plastic properties and ability to harden when heated. This maintenance gate will be installed above a Titan Slide Gate to provide an emergency material shut off solution.
ASR-CS-18-E149011 SQUARE TO ROUND TRANSITION.
dry clay
a fine, powdery material formed from weathered rocks and minerals
widely used in construction, ceramics, and pharmaceuticals due to its plastic properties and ability to harden when heated
a fine, powdery material formed from weathered rocks and minerals
widely used in construction, ceramics, and pharmaceuticals due to its plastic properties and ability to harden when heated
Vortex Model No. MSC18-E144527, 18" Maintenance Gate Valve.
Vortex Model No. MSC18-E144527 - 18" Maintenance Gate Valve
- Valve body is 6061-T6 aluminum with a 304 stainless steel blade. Material contact is 304 stainless steel and polymer.
- Valve is rated for 250°F(122°C) maximum continuous service.
- Non-rising manual handcrank actuator with LH acme threads. (5 revolutions per inch of travel).
- Blade support guides, end seal, and bonnet seals are nylon.
- Bonnet load seal is Teflon gland packing.Upper power cover is clear polycarbonate
- Bonnet blade guides are UHMW-PE(E144527) - SET UP FOR VIBRATION.
Ball sales & engineering corp.
bulk material processing and haNdling equipment
